About ProTech Plastic
HDPE for real-world projects
ProTech Plastic supplies dimensional HDPE in defined thicknesses and widths, with practical application guidance and continuous rolls cut to length in 5 ft steps.
- Brands
- Bamboo Shield · Sidewalk Shield · Grass Barrier · Pier Protector
- Application areas
- Bamboo · roots · landscape · marine
- Ordering increment
- 5 linear feet
Why ProTech Plastic exists
Dimensional HDPE backed by practical guidance.
ProTech Plastic pairs defined HDPE widths and thicknesses with practical guidance for bamboo, hardscape, landscape, and marine work.
Start with the work
Protech Plastics supplies dimensional HDPE for bamboo containment, tree-root control, deep landscape edging, and dock-piling wrap. Use the application pages to understand the site factors that matter, then compare the material by thickness and width.
Review the material specifications
Six current profiles span nominal thicknesses from 30 to 100 mil and widths from 10 to 48 inches. Each product page shows its dimensions, formulation, minimum cut, and compatible installation hardware before you add footage to the cart.
Cut to the footage you need
Choose a profile and enter the required length in one-foot increments. One order line is intended to be supplied as one continuous cut when available material and shipping limits allow.
Plan before you cut
Measure the complete run and consider overlap or connector allowance, utilities, drainage, access, and site conditions before ordering. Compare the material guide, application pages, and installation field guides. If the appropriate thickness, width, or footage is unclear, send Protech your application, measurements, and site notes.
Start with the work
Explore HDPE by application.
Choose the application that matches the site, compare its depths, and open the planning guide before ordering.
Material details
HDPE specifications at a glance.
Every ProTech Plastic product shows the details that drive the decision: thickness, width, formulation, and orderable linear footage. You can compare the material before it is cut.
- Continuous rolls that conform to curves and enclosures
- Distinct rolls for below-grade and exposed applications
- Dedicated 48 in roll for exposed dock-piling work
- Cut to your length in 5 ft steps
Order by depth and footage
Choose the depth. Enter the footage.
Every barrier, edging, and wrap is ordered in 5 ft steps. Use the product page to enter the total length your layout calls for.
- 1
Confirm the depth
Compare width, thickness, formulation, and planned installation depth.
- 2
Enter the total length
Round the footage your layout requires up to the next 5 ft and order it on the product page.
- 3
Prepare the installation
Use the project guide for measuring, connections, trenching, and ongoing inspection.
Need help choosing a depth?