Dock-Piling Wrap Installation Kit — Up to 10 Piles
Dock-Piling Wrap Installation Kit — Up to 10 Piles
- Free shipping in the lower 48
- Ships same or next business day by FedEx
- 30-day returns
Sold separately from the barrier or wrap it goes with. For a connecting kit, pick the depth that matches your barrier and order one kit per joint. Not sure which one you need? Ask us.
Installation consumables sized for wrapping up to 10 dock pilings with the 48-inch Protech HDPE piling-wrap profile.
- One 3-inch × 1,000-foot roll of black stretch wrap
- One pound—approximately 160—of 1-1/4-inch 316 stainless steel ring-shank nails
- Installation instructions
HDPE piling wrap is sold separately. Calculate the material footage for each pile before ordering this hardware kit.
The consumables for about 10 dock pilings.
Material footage varies with pile circumference, overlap, protected height, and pile count. Calculate the HDPE first; then add one installation kit for about every 10 pilings.
- Fits
- 30 mil × 48 in HDPE piling wrap
- Used for
- Dock-piling wrap installation
- Ordering unit
- One installation kit
Install with the barrier in mind.
-
Calculate the HDPE
Use the calculator on the Pier Protector page: π × pile diameter + 6 in of overlap per pile, with up to 48 in of height per piece. For a taller zone, stack bands with a 6 in overlap, upper band over the lower one.
-
Stage the consumables
The kit has a 3 in × 1,000 ft stretch-wrap roll and about 160 stainless ring-shank nails, enough for about 10 pilings.
-
Work pile by pile
Wrap at least 3 layers of stretch wrap, tack one edge of the HDPE with 3 to 4 nails, pull it tight around the pile, overlap the ends 6 in, then nail the seam every 3 to 6 in. Check each pile before moving on.
Compatibility, made clear.
What comes in the installation kit?
A 3 in × 1,000 ft stretch-wrap roll and about 160 stainless ring-shank nails, enough for about 10 pilings.
Is the 48 in HDPE piling wrap included?
No. The cut-to-length HDPE piling wrap is sold separately.
How much HDPE do I need for 10 piles?
It depends on each pile circumference, overlap, protected height, and count. Use the calculator rather than assuming one fixed footage.
What is the stretch wrap for?
At least 3 tight layers of stretch wrap go on first, under the HDPE. They seal the wood surface in the wrapped band as a layer against marine borers such as shipworms and gribbles. The HDPE on top takes the rubbing, sun and debris.